This device is fairly simple to set up and adjust, switch to heating or cooling mode freely. It is very accurate in keeping the temperature at the desired level. Plug and play design, easy to use. It is suitable for freezer, green house, dog house,incubators, etc.
Show the measured temperature, start temperature and stop temperature at the same time.
Digital tube LED display for clear readings, 4 buttons for easy operation.
Pre-wired cord with a plug, plug and play design for convenient use.
Heating/refrigeration modes, users can set the start/stop temperature freely.
Temperature measuring range: -9C~99C; resolution: 0.1C.
Also with temperature calibration function.
Indicator light for indicating working status.
Suitable for a wide range of applications, such as fish tank, floor heating, green house, etc.
This controller can not be used with air conditioner and compressor.
Plug Type: US Plug / EU Plug(Optional)
Power Supply: AC 110V-240V
Display: LED Digital Tube
Temperature Measuring Range: -9C~99C
Control Precision: 1C
Measuring Accuracy: 0.1C
Refresh Rate: 0.5s
Temperature Calibration Range: (+/-)9C
Measurement Input: NTC(10K0.5%)Waterproof Type Sensor
Output: Relay 10A One Load
Static Current: less than 40mA
Attraction Current: less than 65mA
Working Environment: -10C~60C, Humidity 20%~85%
Working Modes: Heating or Cooling Mode
Power Cable Length: Approx. 150cm / 59in
Item Size: 140 x 98 x 44mm / 5.5 x 3.86 x 1.7in
Item Weight(with Sensor and Power Plug): 320g / 11.3oz
Package Size: 20 x 13 x 5.5cm / 7.87 x 5.12 x 2.16in
Package Weight: 340g / 12oz
1 x Temperature Controller with Sensor
1 x User Manual(English)
Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Tuy nhiên tuỳ vào từng loại sản phẩm hoặc phương thức, địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, .....