Material: plastic / resin
Uses: crystal epoxy production, cos equipment production, RC boat production, DIY glass steel works, reinforcement, etc.
Product size: A glue 9.3 x 3.5cm, B glue 7.3 x 2.7cm, material package 15.1 x 10.9 x 3.5cm
1.Mixed two bottles: A (large bottle): B (vial) = 3:1 ratio(weight ratio).
2. Stirring must be uniform, especially the inner wall of the container, the bottom, etc., about 5 minutes. You can use glass rods, bamboo sticks, etc.After mixed,this product is better to let stand for 3-5 minutes before used in order to break the bubbles which produced when it was mixing in time.
3. Please try a little bit before using the product a lot ,so that would master the skills and avoid mistakes.
4.When using crystal glue, be careful not to stick it on your hands or body. If this happens, wipe off the glue with a cloth or paper towel, then rinse with water soap or detergent.Note:
1.The surface of the item that need to be droped rubber must keep dry and clean.
2 Measure the glue A and glue B with the weight ratio correctly and mixing them evenly in order to avoid incomplete solidification.
3.Gluing timely after stir well and running out of it in the available time as soon as possible.
4.Please keep the product horizontally,to avoid the overflow of the glue solution in the process of curing.
* Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Tuy nhiên tuỳ vào từng loại sản phẩm hoặc phương thức, địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, ..
Xem Thêm Nội Dung