Electronic Flow Meter, Electronic Flow Sensor 0.3-10L/M for solar water heater, water flow meter G1/2 YF-B8 Magnetic valve

Features:

4. Copper material, environmental friendly material, small, flexible and functional.

5. Intubation design of inlet and outlet pipe, easy connection and operation;

6. Imported Hall IC from Japan, stable and reliable;

7. Range: 0.3-10L/min;

8. working voltage: DC3-24V;

9. rated voltage: DC5V;

10. Output voltage(rated: DC 5V); High level 4.5V and above; low level 0.5V and below

11. Pulse output duty cycle: 50+-10%

12. Insulation resistance: 100M Ohm and above;

13. Tightness: Seal up all the holes, and inflate with 2MPa water, after 1 minute, no leakage and deformation;

14. -20-80 Cel.degree;

15.pulse F=8.1*Q-3

Function: For the sense of the water flow rate on the following equipments: Thermostatic water heater,

water purifier, water dispenser, smart card equipment, coffee machine etc.

Calculation Formula: F=[8.1Q-3] ��10%, F is pulse value(HZ), Q is flow (L/min)

Note:

1. When magnetic material is close with the sensor, its characteristics may vary.

2. In order to avoid particle debris, the sensor must be installed after a filter.

3. The flow sensor installation has to avoid strong vibration and shaking of the environment,

so as not to affect the sensor's measurement accuracy.

Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....

Thương hiệu: JUNGSAEMMOOL

Electronic Flow Meter, Electronic Flow Sensor solar water heater, water flow meter G1/2 YF-B8 0.3-10L/M Magnetic valve