Colour: Black

Turn on HD printing

A. The slight deformation or opening of the carton is mainly caused by collision during transportation. Does not affect the printing function. Recommended for use in normal procedures;
B, the serious deformation of the carton is mainly due to transportation damage. Please disassemble the black plastic bag to check whether the appearance of the powder box is damaged, powder leakage, deformation or parts falling off. If the appearance is good, it is recommended to use it according to the normal procedure. If there is a defect or the print quality is not good, contact us and we will give it a replacement.

A. First, confirm whether the toner cartridge you purchased can be applied to your machine. B. Is the part of the injection molded part that is in contact with the machine correct? C. Confirm that it cannot be installed. It is recommended that you contact us to replace the correct type of toner cartridge;

A, two consecutive powder boxes are not recognized. But test other brands of toner cartridges OK. Possible causes: The printer version is upgraded, the chip does not match the printer (other models or other versions are used incorrectly); B, two consecutive toner cartridges are not recognized. Testing other brand chips does not recognize. Possible cause: The printer is damaged; it is recommended that you check if the printer is working properly.

Place a blank paper under the powder box and pat the powder box three times. Observe if any toner is falling, if only a small amount of toner falls out. The explanation is that the remaining powder is not clean. It is recommended to continue to use. If there is toner falling out. Or there is a bottom ash in the printed proof, mainly due to the fact that the seal is broken during transportation and the parts are loose. It is recommended to contact us for replacement.

A. "Hey, the sound, the possible reason: the individual gear assembly fit is not good, resulting in jump teeth; it is recommended that you re-install the machine; B, "Hey, the sound, the possible cause: the scraper lubrication powder is too small, Friction OPC generation. The magnetic roller conductive wire is not well assembled, the friction conductive steel sheet is produced, and the OpC and the bearing plate are not well matched in friction. It is recommended that you contact us for replacement.

Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....

Thương hiệu: PrintRite

Tianwei CRG328 toner cartridge HD version for Canon MF4712 4752 LBP6230DN L150 L418S HP M1536dnf MFP P1606dn CE278A cartridge