Product description:

Equipped with 2 specially customized Zhengling fully gold-plated 4P pins

Super fever design, SMD op amp conversion board made regardless of cost

2.0mm FR4 sheet, 2oz copper thickness, chemical immersion gold process

The outer dimensions are the same as the standard DIP8 socket

Replacing op amps requires certain electronic knowledge, hands-on ability, and risks;

Advanced op amps are precision integrated circuit products and are very squeamish. In any case, wrong pin connection and electrostatic breakdown may cause irreversible damage;

Do not use a heat gun when soldering SMD op amps. The soldering iron welding temperature should be lower than 300 degrees, otherwise the chip will be damaged;

Before soldering, take the op amp out of the package and use a solidly grounded soldering iron or an anti-static soldering station;

Wear pure cotton clothing for welding operations or wear anti-static clothing;

Wear anti-static bracelets and gloves! If there is no condition, it can be used for simple protection. One end of the copper wire is wrapped around the wrist and the other end is connected to the water pipe. Both hands should be used to reduce the consequences of accidental electric shock.

Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....

Thương hiệu: OEM

1set/20sets Single to double SMD single op amp to double op amp DIP8 straight plug PCB board with full gold-plated round pin