MKS Gen main board controller can compatible with Ramps1.4, Mega2560 R3 and support A4988, DRV8825, TMC2208, TMC2100 drivers.

Features:
Integrate 2560 and Ramps1.4 to one PCB, easier wiring and more stable.
Use fine quality 4-layer PCB.
Use Marlin firmware, same configuration way as Ramps1.4, it can replace Ramps1.4 directly.
Support a variety of stepper drivers: 4988, 8825, TMC2208 and TMC2100.
Available to work with LCD2004, LCD12864, MKS TFT24/28/32/35/70.
Available to connect external large stepper drivers to driver 57 and 86 motor.
Use fine quality MOSFET, better cooling, longer and more stable work.
Use dedicated power chip, support 12V-24V power input, and solve the heat problem of voltage converter.
Stable filter circuit greatly reducesinterference, avoid the problems that the printer crashes or randomly hits.
Accept 24V input, reduce the heated bed current to 1/4 that solves the Mosfet heat problem efficiently.
The driver terminals color of the main board corresponds to the color of MKS series stepper drivers, which helps to plug the stepper drivers in a proper direction.
Retain Servos, AUX-1 and AUX-2 interface of Ramps1.4, provide three 5V output and three 12V output terminals.

Specifications:
Item Weight: 130g / 4.59ounce
Package Weight: 150g / 5.29ounce
Item Size: 143 * 84mm / 5.63 * 3.31in
Package Size: 160 * 100 * 30mm / 6.30 * 3.94 * 1.18in

Attention:
Ensure positive and negative connection is right before powering.
No plugging and removing drivers and motors when powering, otherwise it will easily burn the drivers.
No adjusting the driver current when the motors are running.

Package List:
1 * Control Board
1 * USB

Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....

Thương hiệu: Meterk

3D Printer Platform MKS Gen Main Smooth Stable Open Source DIY Electronic Devices Compatibility Drivers Control Board