imax b6 Features:

1.Suitable for charging LiPo, LiFe, NiMH and NiCd batteries.
2.Max discharging power is up to 5W.
3.Designed with fast charging and storage modes for Li-Po.
4.Having detection for temperature, current and charging time.
5.Coming with T cable, which has strong ability in conducting current.
6.Built in stand-alone balancer for Li-Po.
7.Professional charger and discharger for software control.
8.Compact size is convenient to carry.

Power Input: DC 11 - 18Volt
Circuit power : Max. 80W
Charge current range : 0.1~6.0A
Current drain for balancing Li-po : 300mAh/cell
NiCd/NiMh battery cell count : 1~15cell
Li-ion/Polymer cell count : 1~6series
Pb battery voltage : 2v to 50v
Weight : 350g
Dimensions : 137 X 87 X 33mm

B6 Package Include:

1 x imax B6 LiPo battery balance charger

1 x charge cable with T-plug

1 x Multi-fuctional extension wire

1x XT60 wire

1 x Universal crocodile clip

1 x JST plug

1 x Manual

B6 with Adapter Package Include:

1 x imax B6 LiPo battery balance charger

1 x charge cable with T-plug

1 x Multi-fuctional extension wire

1x XT60 wire

1 x Universal crocodile clip

1 x JST plug

1 x Manual

1 x 15V 6A adapter ( this is b6 with 15V 6A adapter, if need，please select it accroding to picture )

imax B6 V3 Features:

Input voltage DC：11-18V
Charge current 0.1-6.0A
Discharge current 0.1-2.0A
Charge power Max.80W
Discharge power Max.5W
Balance current 200mA
Charging Capability Li.Po,LiHv,Li.lon,Li.Fe：1-6cells
NiCd，NiMH：1-15cells
Pb battery voltage 2-24V
Temperature sensor port ：Yes
Built-in balance ：Yes
Dimensions 135*86*32mm (L*W*H)

-Microprocessor controlled
-High-Power and high-performance circuit.
-Automatically identify the cells counts of lithium battery section.
-Check lithium battery internal resistance.Let you know when a cell is going bad.
-Support LiHV battery
-Support smart battery I,II,III.(need optional smart battery charging cable)
-Maximum Safety: Low Input Voltage setting. Capacity limit, processing time limit, Temperature Threshold.
-Terminal Voltage Control.
-Individual cell balancing, cell voltage Monitoring
-Data storage and loading (Store up to 20 packs in memory)
-Battery break in and cycling
-Digital Power
- Always Balance-Charging For LiPo Battery Packs: when charging any of these LiPo packs, Always use the balance charge mode & use the balance connector/board.

- NOTE: Only supports Li-Ion & LiPo RC battery packs that has a balance connector. DO NOT charge any battery packs without a balance plug!

** Ignoring these WARNINGS could result in fire or personal/property damages **

imax B6 V3 Features:

Universal Voltage Compatibility Compatible with

1.2V-18V NiMH/NiCD batteries (1-15 Cells)
3.7V-22.2V LiPo/Li-ion batteries (1-6 Cells)
3.2V-19.2V LiFePO4 batteries (1-6 Cells),
4.35V -26.1V LiHV batteries (1-6 Cells)
2V-20V PB batteries.

Wide Voltage Range

Compatible with many voltages for each battery type.
Support LiHV battery
Automatically identify the cells counts of lithium battery section.
Check lithium battery internal resistance.Let you know when a cell is going bad.

Multiple Functions

the battery charger is built in an independent Lithium Battery Balance to monitor and balance each battery cell, and it has Fast & Storage Charging function, Data Storage & Load function, Cyclic Charging & Discharging function.

Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....

Power Input: DC 11 - 18VoltCircuit power : Max. 80WCharge current range : 0.1~6.0ACurrent drain for balancing Li-po : 300mAh/cellNiCd/NiMh battery cell count : 1~15cellLi-ion/Polymer cell count : 1~6seriesPb battery voltage : 2v to 50vWeight : 350gDimensions : 137 X 87 X 33mm

Power Input: DC 11 - 18Volt
Circuit power : Max. 80W
Charge current range : 0.1~6.0A
Current drain for balancing Li-po : 300mAh/cell
NiCd/NiMh battery cell count : 1~15cell
Li-ion/Polymer cell count : 1~6series
Pb battery voltage : 2v to 50v
Weight : 350g
Dimensions : 137 X 87 X 33mm

Thương hiệu: OEM

iMAX B6 80W 6A Battery Charger Lipo NiMh Li-ion Ni-Cd Digital RC Balance Charger Lipro Charger Discharger + 15V 6A Adapter